The Siglent SNA5002A is a high-performance 2-port Vector Network Analyzer with a frequency range of 9kHz up to 4.5GHz with a resolution of 1Hz, a dynamic range of 125dB, and a level resolution of 0.05dB. The Siglent SNA5000A series of VNAs supports measurements such as scattering-parameter, differential-parameter, time-domain parameter, Q-factor, and filter bandwidth and insertion loss. SNA5000A VNAs feature impedance conversion, movement of measurement plane, limit testing, ripple test, fixture simulation and adapter removal/insertion adjustments. Bias-tees are also supported.
These VNA analyzers provide five sweep types: Linear-Frequency mode, Log-Frequency mode, Power-Sweep mode, CW-Time mode and Segment-Sweep mode. Operation is simplified with the VNA’s large 12.1” touch-screen, which operates in addition to traditional front-panel buttons. An HDMI output is provided so that an even larger display or projector may be used. Many useful display modes may be selected, such as: multi-window, multi-format, display hold, memory comparison, and impedance conversion. Calibration choices include: Response calibration, Enhanced Response calibration, Full-one port calibration, Full-two port calibration, Full-three port calibration, Full-four port calibration, and TRL calibration.
LAN and USB interfaces are provided (USB-GPIB optional) to allow remote control via SCPI/Labview/IVI/VXI-11/Socket/Telnet/WebServer, etc.
Specifications:
-
Frequency Range: 9 kHz - 8.5 GHz
-
Frequency Resolution: 1 Hz
-
Level Resolution: 0.05 dB
-
Range of IFBW (Intermediate Frequency Bandwidth): 10 Hz - 3 MHz
-
Setting Range of Output Level: -55 dBm to +10 dBm
-
Dynamic Range: 125 dB
-
Types of Calibration:
- Response calibration
- Enhanced Response calibration
- Full-one port calibration
- Full-two port calibration
- Full-three port calibration
- Full-four port calibration
- TRL calibration
-
Types of Measurement:
- Scattering-parameter measurement
- Differential-parameter measurement
- Receiver measurement
- Time-domain parameter analysis
- Limit test
- Ripple test
- Impedance conversion
- Fixture simulation
- Adapter removal/insertion
- Support for Bias-Tees
-
Interface: LAN, USB Device, USB Host (USB-GPIB)
-
Remote Control: SCPI/Labview/IVI based on USB-TMC/VXI-11/Socket/Telnet/WebServer
- 12.1-inch Touch Screen
-
Video Output: HDMI
Includes
- Quick Start
- Power Cable
- USB Cable
- Calibration Certificate
Download Datasheet
Returns Policy | Terms of Service