Siglent SNA5012A 9kHz - 8.5GHz 2 Ports Vector Network Analyzer

The Siglent SNA5012A is a high-performance 2-port Vector Network Analyzer with a frequency range of 9kHz up to 8.5GHz with a resolution of 1Hz, a dynamic range of 125dB, and a level resolution of 0.05dB. Siglent’s SNA5000A series of VNAs supports a host of RF measurements that include scattering-parameter, differential-parameter, time-domain parameter, Q-factor, and filter bandwidth and insertion loss. SNA5000A VNAs feature impedance conversion, movement of measurement plane, limit testing, ripple test, fixture simulation and adapter removal/insertion adjustments. Bias-tees are also supported.  

These sophisticated VNA analyzers provide five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep.  Operation is simplified with the VNA’s large 12.1” touch-screen, which operates in addition to traditional front-panel buttons. An HDMI output is provided so that an even larger display or projector may be used. Many useful display modes may be selected, such as: multi-window, multi-format, display hold, memory comparison, and impedance conversion. Calibration choices include: Response calibration, Enhanced Response calibration, Full-one port calibration, Full-two port calibration, Full-three port calibration, Full-four port calibration, and TRL calibration. 

LAN and USB interfaces are provided (USB-GPIB optional) to allow remote control via SCPI/Labview/IVI/VXI-11/Socket/Telnet/WebServer, etc. 

• Frequency Range:

  • 9 kHz - 8.5 GHz

• Frequency Resolution:

  • 1 Hz

• Level Resolution:

  • 0.05 dB

• Range of IFBW (Intermediate Frequency Bandwidth):

  • 10 Hz to 3 MHz

• Setting Range of Output Level:

  • From -55 dBm to +10 dBm

• Dynamic Range:

  • 125 dB

• Types of Calibration:

  • Response calibration
  • Enhanced Response calibration
  • Full-one port calibration
  • Full-two port calibration
  • Full-three port calibration
  • Full-four port calibration
  • TRL calibration

• Types of Measurement:

  • Scattering-parameter measurement
  • Differential-parameter measurement
  • Receiver measurement
  • Time-domain parameter analysis
  • Limit test
  • Ripple test
  • Impedance conversion
  • Fixture simulation
  • Adapter removal/insertion

• Support for Bias-Tees

• Interface:

  • LAN
  • USB Device
  • USB Host (USB-GPIB)

• Remote Control:

  • SCPI/Labview/IVI based on USB-TMC/VXI-11/Socket/Telnet/WebServer

• Display:

  • 12.1-inch touch screen

• Video Output:

  • HDMI

Includes

• Quick Start
• Power Cable
• USB Cable
• Calibration Certificate

Download Datasheet

Returns Policy | Terms of Service